nano3G AP Installation Manual
Pre-Provisioning a nano3G AP
N3G_INST_300 v14.0 for N3G_2.85 © ip.access Limited 2012
Page 31
4)
The Load Attributes From File Wizard shows the chosen AP object:
5)
Choose
From server file
or
From local file
, according to the location of the edited
configuration file.
6)
Click the Browse button
then use the file browser to select the edited
configuration file.
7)
Click the
Load
or
Open
, according to which file browser is in use, and the file
name is shown in the Load Attributes wizard. Click
Next
.
8)
By default the operation is scheduled for Now, so click
Finish
to load and apply the
configuration settings.
9)
Repeat as needed, if there are multiple configuration files.
3.3.2
Apply an AP Template to the AP
For information on working with templates, see [OPM_415].
1)
If not already logged in, log in to the NOS Client with a user name that has Full
Access to the AP.
2)
Find the required AP template under NOS > Templates.
The object type must match. That is, use an apNano8_020 template for E8 APs,
E16 APs and S8 APs. Choosing a template with a different object type will have no
effect on the target AP.