Ip.Access nano3G AP, Installation Manual

Page: 74 / 89

nano3G AP Installation Manual Finalize Installation
N3G_INST_300 v14.0 for N3G_2.85 © ip.access Limited 2012 Page 68
7.4 Disable Web Interface from NOS
From the NOS it is possible to disable and re-enable the APs web interface. This setting is
preserved across a Factory Restore.
Use the following flag in AP_Diag Tuning for this purpose:
• WEBIF_CTRL_PERMANENT_DISABLED_CMD = 1 will disable it
• WEBIF_CTRL_PERMANENT_DISABLED_CMD = 0 will re-enable it
1) Login to the NOS Client with a user ID that has Full Access rights to the required
AP.
2) Find the required AP within the APs under BSMIS APs Per AC.
Hence, drill down to the AP like this:
Root > APs > BSMIS APs Per AC > Site > relevant AP
3) In the Navigation Pane, select the 3G AP Diagnostics Package and drill down into
the Diagnostic Tuning attribute.
4) Click the + button under the Attribute pane to add a new instance to the Diagnostic
Tuning list.
5) Drill down into the new instance.
6) In the Name, enter:
WEBIF_CTRL_PERMANENT_DISABLED_CMD = 1 will disable it
WEBIF_CTRL_PERMANENT_DIASABLED_CMD = 0 will re-enable it
This must be entered exactly as shown. If there is any variation, this will not have
the desired effect.
7) In the Value, enter 1.
For example:
8) Click Apply to save the changes.
If the Apply button is not available, use the TAB key to exit field entry first.
9) Right-click the AP object and select Reinitialise. This restarts the AP so that it uses
the configuration change.