Ip.Access nano3G AP Installation Manual Download

Page: 24 / 89

nano3G AP Installation Manual

Installation Overview and Requirements

N3G_INST_300 v14.0 for N3G_2.85 © ip.access Limited 2012

Page 18

This will deliver up to 8 voice calls and HSDPA services up to 14.4 Mbps.

Note:

If the available bandwidth on site does not meet the requirements see the Troubleshooting
section 8.

2.4.4

nano3G E16 AP IP Bandwidth Requirements

At maximum capacity and with IPsec in use, a nano3G E16 AP will require:

• Downlink: 17Mbps

• Uplink: 1.9Mbps

This will deliver up to 16 voice calls and HSDPA services up to 14.4 Mbps.

Note:

If the available bandwidth on site does not meet the requirements see the Troubleshooting
section 8.

2.4.5

nano3G E8 AP and E16 AP Installation Tool Requirements

To mount the bracket onto the wall:

• 6 pan head screws, size No. 6 (approx 3.5mm (0.14in) in diameter) – 4 for the AP

bracket, 2 for the POE+ adapter

Note:

No screws are supplied to mount the AP or the POE+ unit.

• Wall plugs if required.

• Suitable drills and screwdriver.

Note:

If the available bandwidth on site does not meet the requirements see the Troubleshooting
section 8.

Summary of Contents for nano3G AP


























































































Search results

Summary of Contents for nano3G AP

Reviews:

Related manuals for nano3G AP

Brands by name

Popular brands

Ip.Access nano3G AP, Installation Manual

Search results

Summary of Contents for nano3G AP

Reviews:

Related manuals for nano3G AP

Brands by name

Popular brands