nano3G AP Installation Manual
Pre-Provisioning a nano3G AP
N3G_INST_300 v14.0 for N3G_2.85 © ip.access Limited 2012
Page 20
4)
Select the Object Class radio button and in the drop-down list on the left ensure
Nano-8 or Nano-16 3G AP (SR2.0 -)
is selected. This is applicable to E8 APs, E16
APs and S8 APs.
Note:
Do not select Nano-4 3G AP (SR2.0 -) as this is not supported in
N3G_2.85.
Note:
If they are present, do not choose either of the choices for (SR1.2 -
PRE-SR2.0). These are only used for APs running software from a
release prior to N3G_2.85. These choices must be present for backwards
compatibility and they enable AP upgrades from previous releases.
3.2.2
Optional - Use an Existing AP Configuration
5)
Click
Next
and the AP Selection page of the wizard will appear:
Optionally use this page to copy the configuration of an existing AP.