SECTION 5—CABINET ASSEMBLY
27
Replacing Non-Skid Adhesive Back Pad
NOTE: For this procedure, refer to
FIGURE 5.3.
1. Peel the existing pad from the cabinet
and discard.
2. Peel the backing from the new pad.
3. Attach the new pad to the cabinet.
FIGURE 5.3
Replacing Foam Gasket
NOTE: For this procedure, refer to
FIGURE 5.4.
1. Remove the cabinet. Refer to
Removing/Installing the Cabinet on
page 25.
2. Peel the existing foam gasket from the
inside of the control panel opening and
discard.
3. Peel the backing from the new foam
gasket.
4. Attach the new foam gasket to the
inside of control panel opening.
FIGURE 5.4
Pad
Control Panel
Opening
Foam Gasket
