SECTION 10—COMPRESSOR REPLACEMENT
66
FIGURE 10.6
Compressor Replacement - Assembly of New Motor/Pump Assembly
Reassembly
NOTE: For this procedure, refer to FIGURE 10.1 through FIGURE 10.5.
1. Position the motor/pump assembly on the base (FIGURE 10.5).
2. Secure the motor/pump assembly to the base with six mounting screws. Torque
mounting screws to 25-30 in-lbs (2.82-3.39 Nm) (FIGURE 10.5).
3. Position control panel assembly on base (FIGURE 10.4).
4. Connect the two connectors (not shown) to the hour meter (FIGURE 10.4).
DETAIL “A”
Pump Assembly
DETAIL “B”
DETAIL “C”
Washers
Timing
Belt
Large Pulley
Motor Pulley
Pump
Assembly
Mounting Screw
and Washer
Pump Assembly
Crankshaft
Connecting Lines
Between Stages
Mounting
Screw
Bushing
Mounting
Screw
Bushing
Motor
Pump
Assembly
