IfU TECOTHERM NEO TN300 EN - 01.doc
Page 4 of 76
Ref No. TN300 EN-01
2.
Preface
2.1 Intended Use
This Instructions for Use (IfU) presents a detailed introduction into the
operation modes of TECOTHERM NEO from TEC COM GmbH.
The Hypothermia System TECOTHERM NEO is designed for controlled
comfortable cold & heat treatment procedures. By means of mattresses or
cool wraps cold and heat is applied to the total body, body parts or areas of
neonate depending on the therapy objective.
One main application is induced hypothermia treatment of neonate affected
with Hypoxic Ischemic Encephalopathy.
The IfU contains a Technical Desription and technical data.
TECOTHERM NEO of TEC COM exhibits SERVO CONTROL operation as
a modern excellence feature using MENU assistance.
TECOTHERM NEO of TEC COM has been equipped with two micro
computers and with numerous monitoring and alarm features which
guarantee a high standard of treatment and operation safety.
We highly recommend that the operator is familiar with the operation modes
and capabilities of the TECOTHERM NEO. Prior to putting into operation
carefully read these IfU!
This IfU is associated with a software version. The valid version number is
displayed at the lower left part of operator’s MENU display screen after
switching on the device.
Note:
The Manufacturer carries responsibility for basic safety, reliability and
capability of the TECOTHERM NEO system only when
local electrical installation fully meets the requirements of the IfU.
initial operation is performed according prescribed Instruction
procedure by authorized personnel.
TECOTHERM NEO is operated according to the instructions and
statements of said IfU.
