IfU TECOTHERM NEO TN300 EN - 01.doc
Page 38 of 76
Ref No. TN300 EN-01
7.9 MENU and the User Interface / USB connection
The operator is working within the framework of the Operator System (Operation
Board). This system is based on a Windows Operating System.
TECOTHERM NEO provides a comfortable Men- Machine Interface :
MENU
as the
User Interface
, display screen as
Visual Interface
and
Pushbuttons /
Keys to move
along the MENU instruction entries.
Display visualizes MENU operations and treatment procedures
The user either selects, confirms or modifies treatment modes, treatment options,
operations and parameter settings using the
Arrow Keys
to move to MENU entries.
Such active entry is coloured turquoise. Direction of movement is shown by the arrow
keys, see section 7.2.
Pushbuttons below display screen enable performing instructions like Select, Confirm,
Cancel, Apply, Start etc.
TECOTHERM NEO Main MENU always serves as a Starting point for navigation. Using
Main MENU the operator selects a Menu language: entry Language., see section 8.3.
Entries at the MENU left side are accessible for the operator except entry SERVICE.
Access to entry SERVICE is only for service personnel using a password.
TECOTHERM NEO Main Menu
Ser.-Nr. 2010/08/01
Rev. 023/01.32
Highlight and Select Function Required:
Servo controlled complete treatment mode
Servo control mode (constant rectal temperature)
Constant Mattress Temperature Mode
Alarm check
Export treatment data
Service
Power Off
Select
Language
Alarms and troubles are indicated optically by ICON symbols
TECOTHERM NEO
A check of the internal functions has been performed and did not
Now the alarm functions will be checked. Can you see the various
Symbols and clearly hear the two alarm sounds?
No
Yes
detect any malfunction.
SF
