IfU TECOTHERM NEO TN300 EN - 01.doc
Page 13 of 76
Ref No. TN300 EN-01
Indications for hazardous substances
TECOTHERM NEO does not contain parts or substances stemming from derivatives of
blood or human/ animally tissues.
TECOTHERM NEO does not contain parts made of Latex or its derivatives.
TECOTHERM NEO Applied Parts do not contain parts made of PVC with DEHP
softener/ plasticizer
Thermalizing Fluid TECOmed is made of 70 % water, 30% pure Ethyl alcohol. Very
small quantity < 0,3 % denaturing agent Methyl- Ethyl- Ketone MEK is added. Details
see Safety Data Sheet.
Caution
Do not swallow or ingest fluid.
Skin contact with TECOmed fluid is harmless.
Note
After use close TECOmed containers tightly
Ambient Conditions
To ensure a proper operation in normal use pay attention to the following conditions
Protection
The device should be protected from dampness and wetness
(e.g. splash water.)
To have full cooling power ambient temperature should not exceed 27°C. Otherwise
the TECOTHERM NEO system may not achieve the lowest possible set temperature
of a big mattress.
Relative Humidity during treatment within a range of 30 % - 80 %
Ensure that during treatment/ operation no installations, systems, devices and the
like are operating or are intended to operate next to TECOTHERM NEO and
producing
strong electromagnetic radiation
ultraviolet radiation
intense infrared radiation
mechanical shocks, vibrations.
Do not intensively illuminate the device.
