Operating Instructions
64
Figure 129: Up, Down, Select Keys
The first enabled Change Mode Menu selection
will appear. To choose that function, press the
SELECT Soft Key. To Scroll through the enabled
features in the Change Mode Menu, press the UP
and DOWN Soft Keys (Figure 130).
Figure 130: Select, Up, Down Keys
Possible mode selections are shown later in this
section.
•
Only those modes that have been enabled will
appear. Only the Cycle Sentry Menu is
enabled on factory units.
•
Not all modes may be available, depending on
OptiSet Plus usage and the settings of other
programmable features.
•
To return to the Standard Display press the
EXIT Key.
•
The modes shown below may be available.
Turn Cycle Sentry On or Off
Cycle Sentry Mode can be turned On or Off if
Cycle Sentry Mode is allowed by OptiSet Plus. If
Cycle Sentry is turned off the unit runs in
Continuous mode, unless Continuous Mode is not
allowed by OptiSet Plus. Either Cycle Sentry or
Continuous operation can be disabled via OptiSet
Plus. From the Main Menu > Change Mode menu
choose Turn On/Off Cycle Sentry Mode and press
the SELECT Soft Key (Figure 131).
Figure 131: Select Key
If the unit is running in Cycle Sentry Mode, press
the SELECT Soft Key (Figure 132) to turn off
Cycle Sentry Mode as shown below.
Figure 132: Select Key
Confirmation screens will appear briefly, the unit
will switch to Continuous Mode operation and the
Cycle Sentry Icon will disappear.
To turn Cycle Sentry back on press the SELECT
Key again.
To leave this menu without changing the setting,
press the EXIT Soft Key. To return to the Standard
Display press the EXIT Soft Key again.
NOTE: Cycle Sentry Mode can also be turned on
and off using the Cycle Sentry Key on the HMI
Control Panel.
Select Temperature Units
If this feature enabled in Guarded Access > Main
Menu Configuration, the operator can select
temperature units to be displayed as either degrees
Fahrenheit or degrees Celsius. From the Main
Menu > Change Mode menu choose Fahrenheit or
Celsius and press the SELECT Soft Key (Figure
133).
Figure 133: Fahrenheit or Celsius, Select Key
ON
OFF
MAIN MENU
DOWN
EXIT
SELECT
UP
DATA LOGGER
HOURMETERS
MODE
ELECTRIC STANDBY
ON
OFF
CHANGE MODE
DOWN
EXIT
SELECT
UP
TURN ON CYCLE SENTRY MODE
FAHRENHEIT
KEYPAD LOCKOUT
START SLEEP MODE
ON
OFF
CHANGE MODE
DOWN
EXIT
SELECT
UP
TURN ON CYCLE SENTRY MODE
FAHRENHEIT
KEYPAD LOCKOUT
START SLEEP MODE
ON
OFF
CHANGE MODE
EXIT
SELECT
TURN OFF CYCLE SENTRY
ON
OFF
CHANGE MODE
DOWN
EXIT
SELECT
UP
TURN ON CYCLE SENTRY MODE
FAHRENHEIT
KEYPAD LOCKOUT
START SLEEP MODE
