Operating Instructions
37
The Language menu will appear as shown in
Figure 24. Press the + or - Keys to select the
desired language. When the desired language is
shown press the YES Key to confirm the choice.
Figure 24: + or -, then YES Key
The display will briefly show PROGRAMMING
LANGUAGE - PLEASE WAIT in the new
language as shown in Figure 25.
Figure 25: New Language
The new language is confirmed, and then the
Standard Display will appear in the new language
as shown in Figure 26. The unit is ready to run.
Figure 26: Standard Display, New Language
If Log Alarms are Present
Log Alarms are indicated for 60 seconds each
time the unit is turned on. This level of alarm
serves as a notice to take corrective action before
a problem becomes severe. Maintenance items
such as maintenance hourmeter time-outs are log
alarms. The TemperatureWatch screen is not
disabled if only log alarm(s) are active.
If log alarm(s) are present the Log Alarm notice
shown in Figure 27 will appear on the display for
60 seconds. The remote indicator alarm light (if
installed) will also be on during this period. After
60 seconds the Standard Display will appear and
the remote indicator alarm light will go off.
Pressing the EXIT soft key (Figure 27) will return
to the Standard Display immediately.
Figure 27: Log Alarms Active
NOTE: The Alarm Icon does not appear on
startup with log alarms present.
When the unit is ready to run the Standard Display
appears (Figure 28).
Figure 28: Standard Display
Turning The Unit Off
Pressing the OFF Key stops unit operation. The
unit shuts down immediately and the display
briefly shows the power down message (Figure
29).
Figure 29: Power Down Message
ON
OFF
LOG ALARMS ACTIVE
GO TO MENU TO VIEW
EXIT
ON
OFF
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
ON
OFF
SYSTEM IS POWERING DOWN
