Operating Instructions
41
Figure 42: Changing the Setpoint - Numerical Setpoint
Changing the Setpoint - Named
Product
If the TemperatureWatch display is shown, press
any soft key to return to the Standard Display.
From the Standard Display, press the PRODUCT
Key. Note that PRODUCT is displayed in place of
SETPOINT (Figure 43).
Figure 43: Product Displayed
The display briefly shows PRODUCT and then
the setpoint display appears (Figure 44).
Figure 44: Setpoint Display
The “-” and “+” Keys are used to change the
Named Product until the desired product is
shown. In Figure 45 the product has been changed
to Potato, Late Crop.
Figure 45: Named Product
The YES and NO Keys confirm the product
change (Figure 46). When the desired product has
been selected using the “+” and/or “-” Keys, press
the YES Key to confirm and load the new
product. If the product is changed using the “+” or
“-” Keys, the change must be confirmed or
rejected by pressing the YES or NO Key within
10 seconds of changing the product. A warning
beep will sound for 5 seconds as a reminder.
Failure to confirm the new product by pressing
Yes or No within 10 seconds of changing the
product will result in no product change. In
addition, Alarm Code 127 Setpoint Not Entered is
set, to indicate that the product change was
initiated but not completed.
Figure 46: Yes and No Keys
ON
OFF
-
EXIT
CURRENT SETPOINT
35 F
+
+/- TO CHANGE
ON
OFF
-
NO
NEW SETPOINT WILL BE
40 F
+
+/- TO CHANGE
OK?
YES
-
NO
NEW SETPOINT WILL BE
40 F
+
+/- TO CHANGE
OK?
YES
ON
OFF
ON
OFF
MENU
35
°F
40
SET
SENSORS
GAUGES
POINT
.8
ON
OFF
NEW SETPOINT IS
40 F
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
ON
OFF
Setpoint Key
+ or - Keys
Yes or No Keys
New Setpoint
ON
OFF
MENU
59
°F
59
PRODUCT
SENSORS
GAUGES
.8
GRAPEFRUIT, ARIZONA
-
EXIT
CURRENT PRODUCT IS
GRAPEFRUIT, ARIZONA
+
+/- TO CHANGE
ON
OFF
-
NO
NEW PRODUCT WILL BE
+
+/- TO CHANGE
OK?
YES
POTATO, LATE CROP
ON
OFF
-
NO
NEW PRODUCT WILL BE
+
+/- TO CHANGE
OK?
YES
POTATO, LATE CROP
ON
OFF
