Operating Instructions
53
Figure 83: Performing a Pretrip Test
Flash Drive
If a properly configured USB Flash Drive is
currently connected to the USB Port on the unit
Control Panel, the Flash Drive Menu will appear
as a Main Menu selection. If a properly
configured USB Flash Drive is connected to the
USB Flash Drive connector, this feature allows
the operator to select the desired Flash Drive
function. If enabled when the Flash Drive was
configured, the following functions may be
available:
Download
•
Download the ServiceWatch Data Logger
•
Download the CargoWatch Data Logger
Flashload
•
Flash load Base Controller Software
•
Flash load HMI Control Panel Software
OptiSet Plus
•
SEND
•
Send OptiSet Plus files
•
RETRIEVE
•
Retrieve OptiSet Plus files
If a USB Flash Drive is not connected to the unit,
this feature will not appear in the Main Menu.
Flash Drive Icon
• The USB Icon (Figure 84) will
appear in the upper left corner of the
display as shown below when a USB
Flash Drive is inserted into the Flash
Drive Only USB Port on the Unit
Control Panel.
• The USB Icon will also appear if a
computer is connected to the PC Only
USB Port inside the control box.
Figure 84: Flash Drive Icon
Selecting the Flash Drive Menu from the
Main Menu (If Already Connected)
To select the Flash Drive Menu, press the MENU
Key (Figure 85). The Main Menu will appear.
Figure 85: Menu Key
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
ON
OFF
ON
OFF
MAIN MENU
DOWN
EXIT
SELECT
UP
PRETRIP
LANGUAGE
ALARMS
GAUGES
ON
OFF
PROGRAMMING PRETRIP MODE
NO PRETRIP -- ALARM ACTIVE
EXIT
ON
OFF
HOUR
METERS
TEST 1 OF 26
SENSOR CHECK
SENSORS
GAUGES
NON-RUNNING PRETRIP
ON
OFF
TEST 21 OF 26
COOL TEST
RUNNING PRETRIP
HOUR
METERS
SENSORS
GAUGES
ON
OFF
EXIT
PRETRIP
PASS
ON
OFF
Alarms Cleared?
No
Yes
Exit Pretrip Test, clear alarms,
restart Pretrip Test.
ON
OFF
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
ON
OFF
