Operating Instructions
60
The gauges and I/O conditions available are
described in “Gauges Available” on page 48. Not
all gauges or I/O conditions may appear
depending on unit configuration and software
revision.
To return to the Main Menu press the EXIT Key.
To return to the Standard display press the EXIT
Key again.
Sensors
The Sensors Menu allows the operator to view the
unit and CargoWatch Data Logger temperature
sensors. The sensors can always be viewed from
the Main Menu. This is necessary if the
SENSORS Soft Key on the Standard Display has
been reassigned to a different function.
Displaying Sensors
Sensors are displayed using the Sensors Menu.
From the Standard Display, press the MENU Key
(Figure 114).
Figure 114: Menu Key
The Main Menu will appear. Press the UP or
DOWN Key as required to choose the Sensors
Menu. When the Sensors Menu is selected, press
the SELECT Key to choose the Sensors menu.
Figure 115: Up, Down, Select Keys
The first sensors display will appear. Press the
NEXT and BACK Keys to scroll through the
sensors. Pressing the LOCK Key will lock the
current gauge on the display (Figure 116).
Figure 116: Next, Back, Lock Keys
The sensors available are described in “Sensors
Available” on page 49.
To return to the Main Menu press the EXIT Key.
To return to the Standard display press the EXIT
Key again.
Data Logger (CargoWatch)
The CargoWatch Data Logger is physically
located in the HMI Control Panel. It can support
up to 6 optional temperature sensors.
When shipped from the factory, CargoWatch
sensors 1 and 2 are turned on to be logged and
CargoWatch sensors 3 through 6 are turned off.
Also, digital input 1 is turned on to be logged and
digital inputs 2 through 4 are turned off. Sensors
and digital inputs can be turned on, off and
configured using the CargoWatch menu in
Guarded Access or with ThermoServ. The
CargoWatch Data Logger can also be configured
using the USB Flash Drive OptiSet Plus Feature.
A Start of Trip can be sent to the unit
ServiceWatch and CargoWatch Data Loggers. In
addition, the CargoWatch Data Logger contents
can be printed with a hand-held printer.
The ServiceWatch and CargoWatch Data Logger
are accessed using the Data Logger Menu. From
the Standard Display, press the MENU Key
(Figure 117).
Figure 117: Standard Screen, Menu Key
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
ON
OFF
ON
OFF
MAIN MENU
DOWN
EXIT
SELECT
UP
ALARMS
GAUGES
SENSORS
DATA LOGGER
CONTROL DISCHARGE AIR TEMPERATURE
48.
NEXT
EXIT
LOCK
3
°F
BACK
ON
OFF
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
ON
OFF
