Operating Instructions
39
If the Defrost Key or Cycle Sentry Key is pressed,
the display will return to the TemperatureWatch
Display immediately after the defrost cycle is
initiated or the operating mode is changed.
Changing The Setpoint
The Setpoint is changed from the Standard
Display. If the TemperatureWatch display is
present, press any key to return to the Standard
Display.
IMPORTANT: If OptiSet Plus is in use there are
several possible options when changing the
setpoint.
Numerical Setpoints
If OptiSet Plus is not in use or if only Numerical
Setpoints are enabled the left soft key will be
labeled SETPOINT (Figure 33).
Figure 33: Setpoint
Named Products - OptiSet Plus
OptiSet Plus allows the use of Named Products
such as APPLES or BANANAS in place of a
numerical setpoint. If only named products are
enabled the left soft key will be labeled
PRODUCT (Figure 34).
•
A single setpoint temperature may be allowed
for the specific named product.
•
A numerical setpoint range may be allowed
for the specific named product.
Figure 34: Left Soft Key Labeled “Product”
Both Numerical Setpoints and
Named Products
OptiSet Plus can allow the use of both Numerical
Setpoints and Named Products. If both numerical
setpoints and named products are enabled the left
soft key will be labeled PRODUCT/SETPOINT
(Figure 35).
Figure 35: Left Soft Key Labeled
“PRODUCT/SETPOINT”
Changing the Setpoint - Numerical
Setpoint
If the TemperatureWatch display is shown, press
any soft key to return to the Standard Display.
From the Standard Display, press the SETPOINT
Key (Figure 36).
Figure 36: Setpoint Key
The setpoint display appears (Figure 37).
Figure 37: Setpoint Display
The “-” and “+” Keys are used to increase or
decrease the setpoint until the desired setpoint is
shown. In Figure 38 the setpoint has been changed
to 40 F using the “+” Key.
ON
OFF
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
MENU
35
°F
35
PRODUCT
SENSORS
GAUGES
.8
ON
OFF
MENU
35
°F
35
PRODUCT/
SENSORS
GAUGES
SETPOINT
.8
ON
OFF
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
ON
OFF
ON
OFF
-
EXIT
CURRENT SETPOINT
35 F
+
+/- TO CHANGE
