Infotec Aficio 2060, Operating Instructions Manual

Page: 91 / 195

User Tools (System Settings)
84
5
❖ ❖ ❖ ❖
Set Time
Set the time for the copier's internal clock using the number keys.
Note
❒
To change between hours, minutes and seconds, press the [
← ← ← ←
] and [
→ → → →
] keys.
❖ ❖ ❖ ❖
Weekly Timer Code
Sets an 8-digit code to turn on the main power during a time frame in “Week-
ly Timer”.
Note
❒
Default setting: OFF
❒
If “ON” is selected, enter the timer code.
❒
If “ON” is selected without entering the timer code, the machine cannot be
used, even if the power is turned on. If “Off” is selected, the machine can
be used without entering a timer code, when it is turned on.
❖ ❖ ❖ ❖
Weekly Timer: (Monday-Sunday)
Set the power on timer using the number keys.
Interface Settings/Network
❖ ❖ ❖ ❖
IP Address
Before using this machine with the network environment, you must config-
ure the IP address.
Note
❒
Default setting: 011.022.033.044
❒
Do not use an IP address that is used for another machine. To get the ad-
dresses, contact your network administrator.
❒
If you install the IEEE 1394 Interface Board (option) and use the IEEE 1394
interface, you must set the address of the domain, different from the IP ad-
dress of
[ IEEE 1394 ]
. If you intend to set the address for the same domain,
set a different value for the Sub-net Mask.
❒
Press the [
← ← ← ←
] or [
→ → → →
] key to move in 3-digit increments.
❒
Press the
[ Clear ]
key when the wrong address is entered.
❖
❖ ❖
❖
Sub-net Mask
This is a number used to mathematically “mask” or hide an IP address on the
network by eliminating those parts of the address that are alike for all ma-
chines on the network.
Note
❒
Default setting: 000.000.000.000
❒
Press the
[
←
← ←
←
]
or
[
→
→ →
→
]
key to move in 3-digit increments.
❒
Press the [ Clear ] key when the wrong address is entered.
MartiniC1_GBzen2_FM.book Page 84 Friday, April 19, 2002 2:18 PM