Infotec Aficio 2060, Operating Instructions Manual

Page: 45 / 195

Basics
38
2
Acquiring the IP Address from the DHCP Server
To use the DHCP server to acquire the IP address, select [ DHCP ] from [ Network
Boot ]
.
Note
❒
You need to make settings when you use DHCP. See “Using DHCP” in the
Network Printing Guide.
❒
To always assign the same IP address to the machine, reserve the IP ad-
dress for the machine on the DHCP server. See “Using DHCP” in the Net-
work Printing Guide.
❒
Use the default IP address.
A
Make sure that the [ Network ] key is selected, and then press the [ Network
Boot ]
key.
B
Press the [ DHCP ] key, and then press the [ OK ] key.
When using NetWare
To use the machine on NetWare, be sure to select the type of [ NW Frame Type ] .
You can select the following frame types:
• Auto Select (Default)
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
Note
❒
Make sure to select the frame type same as the file server.
❒
When you select “Auto Select”, the frame type detected upon startup is au-
tomatically set. Therefore, your desired frame type may not be selected by
the system, which supports multiple frame types. Select the desired frame
type.
❒
To use the machine in a pure IP environment on NetWare 5/5.1, select [ Ef-
fective ] for TCP/IP in step
D
.
MartiniC1_GBzen2_FM.book Page 38 Friday, April 19, 2002 2:18 PM