Infotec Aficio 2060 Operating Instructions Manual Download Page 87

Page: 87 / 195

User Tools (System Settings)

Note

❒

Default setting:

❒

The tray fence for the optional large capacity tray (LCT) is fixed. If you
need to change the paper size, contact your service representative.

❒

The optional tab sheet holder is required when using tab stock in tray 2 or 3.

Reference

⇒

p.132 “Changing the Paper Size”

❖

Paper Type: Bypass tray

Sets the display so you can see what type of paper is loaded in the bypass tray.
• Paper types you can set for the bypass tray are as follows:

• Plain paper (No Display), Recycled Paper, Special Paper, Colour Paper

1, Colour Paper 2, Translucent Paper, Letterhead, Thick Paper, Label
Paper, OHP, Cardstock, Bond Paper, Punched Paper, Preprinted Paper

Note

❒

Default setting:

No display

❖

Paper Type: (Tray1-3, LCT)

Sets the display so you can see what type of paper is loaded in each of the
trays. This information is used by the print function to automatically select
the paper tray.
• Paper types you can set for trays are as follows:

• Plain paper (No Display), Recycled Paper, Special Paper, Translucent

Paper, Letterhead, Thick Paper, Colour Paper 1, Colour Paper 2, Tab
stock (2-3 tray), Bond Paper, Punched Paper, Preprinted Paper

Note

❒

Default settings:
• Paper Type:

No display

• Copying Method:

2 Sided Copy

• Apply Auto Paper Select:

Yes

❒

A is displayed next to the paper tray if “No” is selected.

❒

The optional tab sheet holder is required when using tab stock in tray 2 or
3.

❒

The number of tab stock shifts can be set to millimeters, when

[

Tab Stock

]

has been selected.

❒

Set the tab stock shift number in the “0 to 15 mm(0" to 0.6")” range in 1 mil-
limeter (1 inch) units. The default setting is “13 mm(0.5")”.

❒

“Thick Paper” and “Tab Stock” can be set simultaneously.

MartiniC1_GBzen2_FM.book Page 80 Friday, April 19, 2002 2:18 PM

Summary of Contents for Aficio 2060




































































































































































































Search results

Summary of Contents for Aficio 2060

Reviews:

Infotec Aficio 2060, Operating Instructions Manual, Page: 87 / 195

Search results

Summary of Contents for Aficio 2060

Reviews: