Infotec Aficio 2060 Operating Instructions Manual Download Page 10 | Manualshive

Page: 10 / 195

background image

3

Information about Installed Software

expat

• The software including controller, etc. (hereinafter “software”) installed on

this product uses the expat Version 1.95.2 (hereinafter “expat”) under the con-
ditions mentioned below.

• The product manufacturer provides warranty and support to the software of

the product including the expat, and the product manufacturer makes the in-
itial developer and copyright holder of the expat, free from these obligations.

• Information relating to the expat is available at:

http://expat.sourceforge.net/

Copyright (c) 1998, 1999, 2000 Thai Open Source Software Centre, Ltd. and Clark
Cooper.
Permission is hereby granted, free of charge, to any person obtaining a copy of
this software and associated documentation files (the “Software”), to deal in the
Software without restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
Software, and to permit persons to whom the Software is furnished to do so, sub-
ject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AU-
THORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAG-
ES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFT-
WARE.

MartiniC1_GBzen2_FM.book Page 3 Friday, April 19, 2002 2:18 PM

«
...
8
9
10
11
12
...
»

Summary of Contents for Aficio 2060




































































































































































































Reviews:

No comments

Related manuals for Aficio 2060

Sure shot 80 tele

Brand: Canon Pages: 24

iPF720 - imagePROGRAF Color Inkjet Printer

Brand: Canon Pages: 8

Brand: Canon Pages: 2

Brand: Xerox Pages: 68

Brand: Xerox Pages: 210

Brand: BadgePass Pages: 2

Brand: Keeler Pages: 25

Brand: Panasonic Pages: 166

Brand: Panasonic Pages: 169

Brand: Oki Pages: 118

Brand: Oki Pages: 126

Brand: Xerox Pages: 8

Brand: Oki Pages: 349

Brand: Canon Pages: 521

Brand: Canon Pages: 456

Brand: Wang Pages: 181

Brand: Swift Pages: 14

Brand: Parkside Pages: 176

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands