manualshive.com logo in svg

Infotec Aficio 2060, Operating Instructions Manual, Page: 160 / 195

Share
Download
Infotec Aficio 2060 Operating Instructions Manual Download Page 160

Where to Put Your Machine

153

7

• When the main power switch is in the Stand-by position, the optional anti-

condensation heaters are on. In case of emergency, unplug the machine's
power cord.

• When you unplug the power cord, the anti-condensation heaters turn off.
• Make sure that the plug is firmly inserted in the outlet.
• Voltage must not fluctuate more than 10%.
• The socket-outlet should be installed near the equipment and should be easily

accessible.

Access to the Machine

Place the machine near the power source, providing clearance as shown.

1.

Rear: more than 5 cm (2")

2.

Right: more than 4 cm (1.6")

3.

Front: more than 70 cm (27.5")

4.

Left: more than 5 cm (2")

Note

❒

For required space when options are installed, contact your service represent-
ative.

MartiniC1_GBzen2_FM.book  Page 153  Friday, April 19, 2002  2:18 PM

Summary of Contents for Aficio 2060




































































































































































































Reviews:

No comments