Infotec Aficio 2060 Operating Instructions Manual Download Page 111

Page: 111 / 195

User Tools (System Settings)

104

Changing a Registered E-mail
Destination

AAAA

Press the

{{{{

User Tools/Counter

}}}}

key.

BBBB

Press the

[

System Settings

]

key.

CCCC

Press the

[

Key Operator Tools

]

key.

DDDD

Press the

[

Address Book Management

]

key.

The registered user list appears.

EEEE

Select the user of the registered e-
mail address you want to change.

Press the user key you want to
change or enter the registered
number using the number keys.

FFFF

Press the

[

E-mail Address

]

key.

GGGG

Enter the items.

To change the e-mail address

Press the

[

Change

]

key on the

right of the e-mail address.

Enter the e-mail address, and
then press the

[

]

key.

Reference

⇒

p.110 “Entering Text”

To change the password

Press the

[

Change

]

key on the

right of the password.

Enter the new password using
the number keys, and then
press the

[

]

key.

HHHH

Press the

[

]

key.

Note

❒

To change the user name, see
p.98 “Changing a User (Desti-
nation) Name or Key Name”.

❒

To clear the user name, see p.99
“To clear a User (destination)”

MartiniC1_GBzen2_FM.book Page 104 Friday, April 19, 2002 2:18 PM

Summary of Contents for Aficio 2060




































































































































































































Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands

Infotec Aficio 2060, Operating Instructions Manual

Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands