Infotec Aficio 2060 Operating Instructions Manual Download Page 106

Page: 106 / 195

User Codes

Press the

[

Change

]

key, and

then enter the new user code
using the number keys.

Press the

[

]

key.

To change Available Functions

Press the

[

User Code

]

key.

Press the key to select the func-
tions to be enabled.

Note

❒

Press the key to make it high-
lighted, and the key will be
enabled.

GGGG

Press the

[

]

key.

HHHH

Press the

[

Exit

]

key.

IIII

Press the

{{{{

User Tools/Counter

}}}}

key.

Clearing a User Code

Important

❒

This operation also deletes user
codes registered for multiple func-
tions. User control with the deleted
user code will be disabled.

AAAA

Press the

{{{{

User Tools/Counter

}}}}

key.

BBBB

Press the

[

System Settings

]

key.

CCCC

Press the

[

Key Operator Tools

]

key.

DDDD

Press the

[

Address Book Management

]

key.

To clear a User (destination)

Press the

[

Delete

]

key.

Select the user (destination)
you want to delete.

Press the user (destination) key,
or enter the registered number
using the number keys.

Press the

[

Yes

]

key in the con-

firmation screen.

To delete the User Code

Select a user (destination) whose
user code is to be deleted.

Press the user (destination) key
to be deleted, or enter the regis-
tered number using the number
key.

Press the

[

User Code

]

key.

MartiniC1_GBzen2_FM.book Page 99 Friday, April 19, 2002 2:18 PM

Summary of Contents for Aficio 2060




































































































































































































Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands

Infotec Aficio 2060, Operating Instructions Manual

Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands