Infotec Aficio 2060 Operating Instructions Manual Download Page 50

Page: 50 / 195

Configuring the Network

EEEE

Press the

[

Exit

]

key.

FFFF

Print the list of entered settings if necessary.

Note

❒

It will take up to 20 seconds for SSID to become active after it has been set.

Reference

For details about List/Test Print, see “Printer Features Menu” in the Print-
er Reference 2.

Press the

[

Printer Features

]

key.

Press the

[

Config. Page

]

key.

The system settings list is printed.

GGGG

Press the

{{{{

User Tools/Counter

}}}}

key.

The new settings become effective and the display returns to the main func-
tion menu.

File Transfer Settings

The following describes the file transfer settings required for the scanner func-
tion. For more information about the settings, see p.89 “File Transfer”.

AAAA

Press the

{{{{

User Tools/Counter

}}}}

key.

MartiniC1_GBzen2_FM.book Page 43 Friday, April 19, 2002 2:18 PM

Summary of Contents for Aficio 2060




































































































































































































Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands

Infotec Aficio 2060, Operating Instructions Manual

Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands