Infotec Aficio 2060 Operating Instructions Manual Download Page 82

Page: 82 / 195

Settings You Can Change with User Tools

Settings You Can Change with User Tools

Reference

To access User Tools, see p.74 “Changing Settings”.

General Features

❖

Panel Tone

The beeper (key tone) sounds when a key is pressed.

Note

❒

Default setting:

❖

Warm Up Notice (Copier/Document Server)

Specify whether or not the beeper sounds when the machine becomes ready
for copying after Low Power mode is deactivated, or the power is turned on.

Note

❒

Default setting:

❒

If the “Panel Tone” setting is “OFF”, the beeper does not sound, whatever
the “Warm Up Notice” setting.

❖

Copy Count Display (Copier/Document Server)

The copy counter can be set to show the number of copies made (count up) or
the number of copies remaining (count down).

Note

❒

Default setting:

Up (count up)

❖

Function Priority

You can specify the mode to be displayed immediately after the operation
switch or System Reset mode is turned on.

Note

❒

Default setting:

Copier

❖

Print Priority

Print priority is given to the mode selected.

Reference

⇒

p.51 “Multi-Access”

MartiniC1_GBzen2_FM.book Page 75 Friday, April 19, 2002 2:18 PM

Summary of Contents for Aficio 2060




































































































































































































Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands

Infotec Aficio 2060, Operating Instructions Manual

Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands