Infotec Aficio 2060 Operating Instructions Manual Download Page 101

Page: 101 / 195

User Tools (System Settings)

Press the title key to be changed.

Enter the new name, and then press the

[

]

key.

Press the

[

]

key.

❖

Address Book: Select Title

Specifies the title to select a user.

Note

❒

Default setting:

Title 1

❖

Auto Delete File

Specifies whether documents stored in the Document Server are deleted or
not after a specified period of time.

Note

❒

Default setting:

Yes After 3 day (s)

❒

If you select “Yes”, documents stored after this setting will be deleted.

❒

If you select “No”, documents will not be deleted automatically.

❒

If you select “Yes”, enter a number of days in the range of 1 - 180.

❒

The default setting is 3 days, which means documents will be deleted 3
days (72 hours) after they are stored.

❖

Delete All Files

All documents stored in Document Server will be deleted.

Note

❒

Even if a password has been set, all documents will be deleted.

❒

A confirmation dialog box will appear. To delete all documents, select

[

Yes

]

❖

Display Password with Stored File

Specifies whether the password for the documents stored in the Document
Server is temporarily displayed or not.

Note

❒

Default setting:

OFF

❒

Only when you forget the password, set to

[

]

. After you confirm the

password, be sure to return the setting to

[

OFF

]

❒

If you set to “ON”, set the “Key Operator Code” to “ON”.

MartiniC1_GBzen2_FM.book Page 94 Friday, April 19, 2002 2:18 PM

Summary of Contents for Aficio 2060




































































































































































































Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands

Infotec Aficio 2060, Operating Instructions Manual

Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands