Infotec Aficio 2060, Operating Instructions Manual

Page: 121 / 195

Troubleshooting
114
6
Misfeeds occur frequently. The side guides of the pa-
per tray may not be locked. Check the side guides are locked.
⇒
p.132 “Changing the Paper Size”
The end guide of the paper
tray may not be locked. Check that the end guide is locked.
⇒
p.132 “Changing the Paper Size”
You may have loaded pa-
per whose size cannot be
detected automatically. When you use paper of a size that
cannot be detected automatically,
set the paper size.
⇒
p.79 “Tray Pa-
per Size: (Tray 2,3)”, p.177 “Copy
Paper”
The saddle stitching staple
cartridge for the Booklet
Finisher has been removed. Reset the saddle stitching staple car-
tridge.
⇒
p.134 “
d
Adding Staples”
An error message remains,
even if misfed paper is re-
moved. When a misfeed message
appears, it remains until
you open and close the cov-
er, as required. Clear misfed paper and open and
close the front cover.
⇒
p.122 “
x
Clearing Misfeeds”
Cannot duplex print You cannot use the paper
in the bypass tray for du-
plex printing. For duplex printing, select Tray 1-3
in Copier mode or with the printer
driver.
The setting for the Paper
Type: Tray 1-3 is “1 Side
Copy”. Select “2 Sided Copy” for Paper
Type: Tray 1-3
⇒
p.80 “Paper Type:
(Tray1-3, LCT)”
During saddle stitching,
paper comes out open and
not neatly stacked. Depending on the type of
paper, the paper opens as it
rebounds when it is folded. Select a paper type with low re-
bound.
The user code entry dialog
box is displayed. Users are restricted by user
management. Enter the user code (up to 8-digits),
and then press the
[ # ] key.
Machine Status Problem/Cause Action
MartiniC1_GBzen2_FM.book Page 114 Friday, April 19, 2002 2:18 PM