Infotec Aficio 2060 Operating Instructions Manual Download Page 28

Page: 28 / 195

2. Basics

Guide To Components

Document feeder (ADF)

Load a stack of originals here. They will
be fed automatically one by one.
The front and back side of 2-Sided origi-
nals are scanned simultaneously.

Exposure glass

Place originals face down here for copy-
ing.

Copy tray (option)

Copied paper is delivered here.

Copy tray guide

When copying onto OHP transparencies
and translucent paper, raise the guide.
This prevents copies from curling when
delivered.

Main power switch

If the machine does not operate after
turning on the operation switch, check if
the main power switch is turned on.

⇒

p.32 “Turning On the Power”

MartiniC1_GBzen2_FM.book Page 21 Friday, April 19, 2002 2:18 PM

Summary of Contents for Aficio 2060




































































































































































































Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands

Infotec Aficio 2060, Operating Instructions Manual

Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands