Infotec Aficio 2060 Operating Instructions Manual Download Page 140

Page: 140 / 195

Changing the Paper Size

133

DDDD

Set the paper size selector knob
inside the tray to the new size.

Important

❒

Problems might occur if the size
of the paper set does not match
the paper size selector, such as:
• Misfeeds
• Parts of the image are not

copied

To adjust the paper size to one
not available on the paper size
selector

Set the paper size selector
knob to the

mark on the left.

Press the

{{{{

User Tools/Counter

}}}}

key.

Press the

[

System Settings

]

key.

Press the

[

Tray Paper Setting

]

key.

Press the

[

Tray Paper Size

]

key.

Select the size, and then press
the

[

]

key.

Press the

[

Exit

]

key or press the

{{{{

User Tools/Counter

}}}}

key to exit

the User Tools.

Reference

For details, see p.79 “Tray
Paper Settings”.

EEEE

Gently push the paper tray until it
stops.

FFFF

Check the paper size displayed
on the display panel.

MartiniC1_GBzen2_FM.book Page 133 Friday, April 19, 2002 2:18 PM

Summary of Contents for Aficio 2060




































































































































































































Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands

Infotec Aficio 2060, Operating Instructions Manual

Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands