Infotec Aficio 2060 Operating Instructions Manual Download Page 38

Page: 38 / 195

Connecting the Machine (Network Connections)

Connecting to the IEEE 1394 Interface (option)

Important

❒

Before making the connection, touch the metallic part to dissipate static elec-
tricity.

Note

❒

Use the interface cable supplied with the IEEE 1394 Interface Board (option).

❒

The interface cable should not be looped.

AAAA

Attach the IEEE 1394 interface cable to the IEEE 1394 ports.

Note

❒

Two interface ports are available for attaching the IEEE 1394 interface ca-
ble.

Connecting to the USB 2.0 Interface (option)

AAAA

Attach the USB 2.0 interface cable to the USB port.

Important

❒

The interface cable is not supplied. It is your responsibility to provide the
interface cable appropriate for the computer that you are using.

Reference

For more information about the USB interface cable, see the Printer Refer-
ence 1.

MartiniC1_GBzen2_FM.book Page 31 Friday, April 19, 2002 2:18 PM

Summary of Contents for Aficio 2060




































































































































































































Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands

Infotec Aficio 2060, Operating Instructions Manual

Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands