Infotec Aficio 2060 Operating Instructions Manual Download Page 100

Page: 100 / 195

Settings You Can Change with User Tools

Press the

[

Key Operator Tools

]

key.

Press the

[

Address Book:Change Order

]

key.

Press the user (destination) key to be moved.

Note

❒

You can select a user using the number keys.

Press the user (destination) key in the place you want to move to.

The user (destination) selected in step

moves to the place selected in

step

, and the keys for other users will shift.

Note

❒

You can select a user using the number keys.

❖

Address Book: Edit Title

You can edit the title to search for a desired user easily.

Press the

{{{{

User Tools/Counter

}}}}

key.

Press the

[

System Settings

]

key.

Press the

[

Key Operator Tools

]

key.

Press the

[

Address Book: Edit Title

]

key.

MartiniC1_GBzen2_FM.book Page 93 Friday, April 19, 2002 2:18 PM

Summary of Contents for Aficio 2060




































































































































































































Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands

Infotec Aficio 2060, Operating Instructions Manual

Search results

Summary of Contents for Aficio 2060

Reviews:

Related manuals for Aficio 2060

Brands by name

Popular brands