Multitron Standard - Operating Manual
Operation
Page
58
of
114
17 March 2021
6.2.6
Tips & Tricks for Loading the Tray
Observe the following notices when loading the tray:
The working volume should not exceed 1/3 of the total volume
of the vessel.
To ensure a smooth movement, place the cultivation vessels
symmetrically and in the middle of the tray. Do not place any
heavy vessels at the edge of the tray.
If any of the vessels protrude over the edge of the tray, they
could collide with the inner wall, resulting in the device being
damaged or vessels breaking. As such, always ensure that the
cultivation vessels do not protrude when positioning them on
the tray.
If the tray is only loaded lightly and is going to be run at high
speeds, place additional cultivation vessels filled with water on
the tray. This will ensure that the device runs more smoothly. At
shaker speeds of approx. 200 up to 250 min
-1
(depending on the
throw and the position of stacked units), the load distribution
plays only a minor role.
