Multitron Standard - Operating Manual
Operation
Page
78
of
114
17 March 2021
6.5.5
Aborting the Timer Function
The timer function can be aborted at any time. To do so, proceed as
follows:
Procedure
1.
Select the timer function using the
F
button (3).
The
Timer parameter symbol (2) will light up. The remaining
time will be displayed in the right-hand view box.
2.
Deactivate the timer using the
On/Off
button (4).
The
Timer active function symbol (1) will go out.
The device will now run with the set setpoints until it is switched
off manually or the setpoints are modified.
INFORMATION
If both timers are active, you will only need to deactivate the first
timer (
F
button); the second timer (
FT
button) will then be deac-
tivated automatically.
3
4
1
2
