Multitron Standard - Operating Manual
Operation
Page
76
of
114
17 March 2021
Setting the Setpoints for Phase 2 (FT Button)
8.
Press the
FT
button (2) to select the parameter in question (RPM
or °C).
The
Next phase (FT) function symbol (1) will light up.
9.
Press the
Plus
or
Minus
button (3) to set the setpoint you want
to use for the selected parameter.
10.
Press the
On/Off
button (4) to activate the parameter.
11.
Repeat steps 8 – 10 as necessary for the other parameters.
Setting the Timer for Phase 2 (FT Button)
12.
Select the timer function using the
FT
button (3).
The
Timer parameter symbol (2) will light up.
13.
Use the
Plus
or
Minus
button (4)
to set the required time.
14.
Activate the timer using the
On/Off
button (5).
The
Cycle active function symbol (1) will light up.
3
4
2
1
3
4
5
1
2
