Multitron Standard - Operating Manual
Safety and Responsibility
Page
14
of
114
17 March 2021
2.6.1
Electrical Current
The device is operated electronically. There is an immediate risk of fa-
tal injury if contact is made with live parts.
The following points must be observed in order to avoid the risk of
fatal injury:
In case of damage to insulation, disconnect the device from the
mains immediately and arrange for it to be repaired.
Disconnect the device from the mains before commencing any
work on the electrical system.
Always use qualified electricians for any work on the electrical
system.
Disconnect the device from the mains before beginning any
maintenance, cleaning or repair work.
Do not bypass any fuses or take them out of operation.
When replacing fuses, ensure they have the correct number of
Amperes.
If the power cable is defective, replace it with a power cable of
the same type.
Keep moisture away from live parts. It may lead to a short cir-
cuit.
Never remove covers from the casing.
2.6.2
Danger due to Moving Parts
There is a risk of injury from moving parts. Body parts can be pinched
or scratched when one is not careful.
However, there is no danger that clothing or body parts can be
pulled into the device due orbital movement of the table.
The danger that fingers are pinched has been minimised by means of
a sufficient distance between the tray and the casing and a stop
mechanism that stops the shaker drive when the door is opened.
Nonetheless, the cultivation flasks must only be moved when the ta-
ble has come to a complete standstill.
2.6.3
Unauthorised Spare Parts and Accessories
Incorrect or imitated spare parts and accessories as well as spare parts
or accessories that have not been authorised by the manufacturer
represent a significant safety risk. As such, we recommend procuring
all spare parts and accessories from an authorised dealer or directly
from the manufacturer. For the contact details of the manufacturer’s
representatives, see page 2.
