Multitron Standard - Operating Manual
Operation
17 March 2021
Page
69
of
114
6.5
Timer Function
ATTENTION
If cultivation is started at low temperatures and the temperature is
then increased (e.g. when using the timer), condensation can form
on the flasks because these are heated up slower than the ambi-
ent air. When using the device in conjunction with the Sticky Stuff
adhesive matting, this can lead to the flasks coming off the adhe-
sive matting.
INFORMATION
If the timer function is not activated, the device runs until it is
stopped by manually deactivating the parameters.
6.5.1
Overview
The timer function can be used to set defined sequences. Two differ-
ent programming modes are available:
One-time change from phase 1 to 2
Cyclical changing between phases 1 and 2
When the timer function is active, the
Timer active function symbol is
displayed.
The following rules are important for understanding the timer func-
tion:
a) The
F
button is always used to set the current parameters.
b) The
FT
button is always used to set the parameters that will ap-
ply for the next phase.
c) The device is always in phase “F”. The “FT” values simply define
what will happen at the next change.
