Multitron Standard - Operating Manual
Operation
Page
72
of
114
17 March 2021
6.5.2
Programming a One-Time Change
Programming the timer for a one-time change is a multi-step proce-
dure:
a)
Set the setpoints (RPM and/or °C) for the first phase using the
F
button and activate the parameters.
b)
Set the setpoints (RPM and/or °C) for the second phase using
the
FT
button and activate the parameters.
c)
Set and activate the timer using the
F
button.
Setting the Setpoints for Phase 1 (F Button)
Procedure
1.
Press the
F
button (1) to select the parameter in question (RPM
or °C).
2.
Press the
Plus
or
Minus
button (2) to set the setpoint you want
to use for the selected parameter.
3.
Press the
On/Off
button (3) to activate the parameter.
4.
Repeat steps 1 – 3 as necessary for the other parameters.
INFORMATION
For details of how to set the parameters, see chapter 6.4 "Adjust-
ing, Activating and Deactivating Parameters", page 65.
1
2
3
