Multitron Standard - Operating Manual
Operation
Page
68
of
114
17 March 2021
Deactivating Parameters
The parameters are deactivated using the same procedure as for acti-
vation. Select the parameter you wish to deactivate using the
F
but-
ton, then press the
On/Off
button to deactivate it. When a parame-
ter is deactivated, the right-hand view box will alternate between the
set setpoint and the message
OFF.
Activating and Deactivating the “Speed” Parameter
When the “Speed” (
RPM) parameter is activated or deactivated, the
following messages will appear in the right-hand view box:
The
Sta (“Start”) message appears when the shaker drive is
switched on and goes out when the speed reaches 20 min
1
.
The
StP (“Stop”) message appears when the shaker drive is
switched off and goes out as soon as the table comes to a
standstill.
The operating panel remains locked for as long as the messages are
displayed. It is not possible to input any commands or information
during this time.
INFORMATION
When starting up the shaker drive, use the time until the setpoint
has been reached to check whether the cultivation flasks are
seated securely on the tray.
