Multitron Standard - Operating Manual
Setup and Function
17 March 2021
Page
29
of
114
3.6.2
Air Vents
The device has air vents on both sides and the rear of the casing.
When setting up the device, you must ensure that these air vents re-
main unobstructed in order to ensure that the exhaust air can be ex-
tracted without obstruction and none of the components overheat.
3.7
Substructure
Different versions of the incubation shaker are available with differ-
ent substructures:
Rubber Feet, 3 cm
Individual units placed on a bench have a substructure comprising an
earthing plate with 7 rubber feet. The rubber feet are bolted onto the
earthing plate at a fixed height and cannot be adjusted. As such,
benchtop models must always be placed on an even surface.
Base, 13 cm
Individual units and devices stacked in threes can be fitted with a
13 cm base. The base has an adjustable foot that can be used to level
the device.
Base, 31 cm
Individual units and devices stacked in pairs can be fitted with a
31 cm base. The base has an adjustable foot that can be used to level
the device.
On individual units with a cooling system, the cooling unit is housed
in the base.
