Multitron Standard - Operating Manual
Operation
17 March 2021
Page
73
of
114
Setting the Setpoints for Phase 2 (FT Button)
5.
Press the
FT
button (2) to select the parameter in question (RPM
or °C).
The
Next phase (FT) function symbol (1) will light up.
6.
Press the
Plus
or
Minus
button (3) to set the setpoint you want
to use for the selected parameter.
7.
Press the
On/Off
button (4) to activate the parameter.
8.
Repeat steps 5 – 7 as necessary for the other parameters.
Setting the Timer (F Button)
9.
Select the timer function using the
F
button (3).
The
Timer parameter symbol (2) will light up.
10.
Use the
Plus
or
Minus
button (4)
to set the required time.
11.
Activate the timer using the
On/Off
button (5).
The
Timer active function symbol (1) will flash.
3
4
2
1
3
4
5
1
2
