Chapter 2 - Features set
User Manual
R5000 series - Web GUI
78
All the parameters of this rule will be applied to this channel
Priority
Set the priority for the packets going through the new rule
of the filter:
-
“Up to” - used to increase the packet priority to the
specified value only if the processed packet has a
lower priority
-
“Set” - used to assign a new priority regardless of the
value already assigned to the packet
Log
Enable/disable filter actions logging in the system log
Direction
Set the input/output direction for applying the new rule:
-
“Input” - the rule is used to process inbound traffic
-
“Output” - the rule is used to process outbound traffic
and for post-routing packet filtering
Interface
Set the interface for applying the new rule
All the available interfaces are displayed in the dropdown
list (physical and logical)
If “any” option is used, the rule will be applied to all
available interfaces
Group
Set the Switch Group number for the applying of the new
rule
The Switch Group must be prior created
Rule
Set the packet capture filter
It is the same syntax called “PCAP expression”, as in the
Switching section
Refer to the filter expression syntax description above
Validate the rule by pressing the «Validate» button
Table 21 - Traffic shaping rules
You can delete an existed traffic shaping rule by pressing the corresponding
«Remove Rule» button.
2.4.10. Extra Commands
The Extra Commands section allows you to take advantage of the CLI configuration
flexibility within the Web interface. While the Web interface is simple to use and
understand, there are several parameters that can be configured via CLI
only
.
