Chapter 2 - Features set
User Manual
R5000 series - Web GUI
36
Password and
Confirm
Password
You can change the password set in the previous
configuration only after unmarking
the option “keep current
system password" in the corresponding checkbox
You can return to the default settings for Password and
User Name (any values with non-zero length) by
u
nmarking the checkbox “Keep current system password”
and leaving the corresponding fields empty and save the
configuration at the bottom of the page
WEB Interface
language
You can change the default system language (English) into
Russian, French, Italian or Chinese language
HTTPS only
You can set that all HTTP connections to the unit to
perform via HTTPS (HTTP with SSL only) by marking the
option
“HTTPS only” in the corresponding checkbox
By default, this option is disabled
Start SNTP
You can start SNTP service by marking the option
“Start
SNTP
” in the corresponding checkbox
By default, this option is disabled
SNTP IP
Address
You can set the IP address of a valid SNTP server
The unit must have an active connection with the SNTP
server in order to receive time services
Time Zone
You can set the time zone in POSIX format. E.g. GMT+4
Latitude
You can set the latitude of the geographical place where
the unit is installed
GPS latitude format is [N/S]YY.YYYYYY
Use the Google Map feature to automatically fill in this field
(follow the indications below)
Longitude
You can set the longitude of the geographical place where
the unit is installed
GPS longitude format is [E/W]XX.XXXXXX
Use the Google Map feature to automatically fill in this field
(follow the indications below)
Table 7 - System Settings
Press the «Open Map» button to open the Google map:
