VSP-V-2006A/2006AHF
Issue 10
1
947207
V-2006A - INTEGRATED SIX ZONE PAGING CONTROL UNIT
V-2006AHF - INTEGRATED SIX ZONE HANDSFREE
TALKBACK PAGING CONTROL UNIT
"WARNING: To reduce the risk of fire or
electric shock, do not expose this equipment
to rain or moisture."
"WARNING: Shock Hazard - Do Not Open."
"AVIS: Risque de Choc Electrique ne pas
Ouvrir."
"PELIGRO: Corriente Electrica - No Abra."
“CAUTION: To reduce the risk of fire replace
only with same type 2A, 125V fuse. 2A, 125V
may be replaced by a 1A, 250V provided
voltage selector is set for 230V.”
“DANGER: Afin de réduire le risque de feu,
remplacez le fusible par le même type de
fusible à 2A, 125V. On peut utiliser un
fusible à 1A, 250V pourvu que le sélecteur
ď
alimentation soit fixé sur 230V. Ne pas
ouvrir.”
“VORSICHT: Zur verringerung von
feuergefahr die sicherung nur mit derselben
type 2A, 125V ersetzen. Statt 2A, 125V Kann
1A, 250V Benutzt werden, vorausgesetzt, die
spannung ist auf 230V eingestellt. Nicht
öffnen.”
“PELIGRO: Para reducir el peligro de
incendio remplazarlo unicamente con un
fusible del mismo tipo 2A, 125V. El fusible
de 2A, 125V podra ser remplazado por uno
de 1A, 250V si el selector de voltaje esta
puesto en 230V. No abres.”
SPECIFICATIONS
Purpose
The V-2006A is an Integrated Six Zone Paging Control
Unit. It provides six individual zones of one-way paging,
plus three programmable zone groups and all call. The
built-in -24VDC power supply provides 1.5 Amps.
The V-2006AHF is an Integrated Six Zone Handsfree
Talkback Paging Control Unit. It provides six
individual zones of talkback and/or one-way paging, plus
three programmable zone groups and all call.
Nominal Specifications
•
Zone Audio Outputs:
One-Way: Will supply audio for up to 150 Valcom
one-way self-amplified speakers per Zone
•
Handsfree:
Will supply audio for up to 2 Talkback Speakers plus
40 one-way speakers per zone
•
Input Impedance:
600 Ohms
•
Input Level:
-10dBm minimum
•
Music Source Impedance:
8 to 600 Ohms
•
Music Source Level:
-10 to -18dBm
•
Speaker Output Impedance:
8 Ohm (1 way)
•
Output Level:
-10dBm (1 way)
1 Watt (talkback)
•
DC Power Output:
-24VDC at 1.5 Amps
•
Power Requirements:
115VAC 2 Amps or
230VAC @ 1 Amp
(slo-blo)
•
Tone Activation:
•
Clock Tone – Dry Contact
•
Night Ring Tone – Dry Contact
or Ring Voltage
-90VAC (20 to 30Hz)
•
K5 and K6 Relay Contacts:
Rated 1 Amp @
125VAC
2 Amps @ 30VDC
