Chapter 2 - Features set
User Manual
R5000 series - Web GUI
71
SNMP access
parameter
Description
Start SNMP
Enable/disable SNMP daemon in the device
Version 1
enable
Enable/disable SNMP v.1 and v.2c support
The first version of the SNMP protocol lacks security in
the operation of the protocol itself, which hinders its use
for network management, so SNMP v.1 and v.2c works
only in read-only mode
By default, it is enabled
Community
Set the community name for read-only mode (SNMP v.1
and v.2c only)
The default SNMP v.1 and v.2c community name is
"public"
It is a security method for SNMP v.1 and v.2c, as Agents
can be set to reply only to queries received by accepted
community names
In SNMP v.1 and v.2c the community name passes along
with the data packet in clear text
Contact
Set the contact information
Used as a reference information about the device owner
Location
Set the geographical location where the unit is installed
Used as a reference information about physical device
’s
location
User Name
Set the authorization user name of SNMP v.3
Password
Set the authorization password of SNMP v.3
Security
Set the security level:
-
the lowest level means no authentication or privacy
(No Authorization No Privacy), you have to set the
User Name only
-
the medium level means authorization and no
privacy (Authorization No Privacy), you have to set
User Name and Password
-
the highest level means authorization and privacy
(Authorization and Privacy), you have to set the User
Name, Password and Privacy Password
