Chapter 3 - Configuration scenarios
User Manual
R5000 series - Web GUI
109
3.6.
Configuring radio profiles
One of the most common situations when we configure more than one radio profile
for a CPE is when it can establish a wireless link to more than one base station,
depending on the link quality. The CPE can switch the communication with other
base stations in order to be operational and to provide services in the situation when
the wireless link with the main BS is dropped.
For this example, we have three units with the default configuration.
Step 1
After the authentication on the first
unit, let’s go to Basic Settings → Link Settings
menu and let’s do the following configuration in General Settings section:
-
Enable link: selected
-
Type: slave (for the CPE)
-
MultiBS: selected (this option tells the CPE to search automatically for another
BS when the link with the main BS is lost)
-
Auto Tx Power: selected
-
Node name: Node2
Press the «Add Profile» button, set the profile number 2 and then press the «Ok»
button:
Figure 87 - Add radio profile
