Chapter 3 - Configuration scenarios
User Manual
R5000 series - Web GUI
99
Figure 75 - Creat an SVI interface
Figure 76 - Associate a Switch group to the SVI interface
Step 4
The management traffic in our network belongs to VLAN 100 and therefore, it is
tagged. In order to access the unit through the management network, an L3-interface
is needed to be accessible via VLAN 100.
For this purpose, we have to create a VLAN interface (it will act as a sub-interface
of the SVI interface created in Step 3):
-
Press the «Create VLAN» button
-
Configure the “svi100” interface as the Parent interface for the “vlan100”
interface
-
Configure the “Vlan ID” parameter for the management VLAN 100
-
Configure the IP address and the network mask for the management interface
(let’s set for this example the IP and mask 10.10.10.10/24)
Figure 77 - VLAN interface associated to the SVI interface
Step 5
