Chapter 2 - Features set
User Manual
R5000 series - Web GUI
69
-
“Deny” - the packet will be dropped
-
“Pass” - the packet will be passed to the next rule in
the list and logged in the system log (only if the log
check box is marked)
Channel
Allocate a logical channel if there are logical channels prior
created in Traffic Shaping section (it is active only if the
action "permit" is selected)
If you allocate a number for a logical channel that was not
prior created in Traffic Shaping section, it has no effect in
the rule configuration
For the indications how to create a logical channel, please
refer to Traffic Shaping section below
Priority
Set the priority for the packets going through the new rule
of the filter:
-
“Up to” - used to increase the packet priority to the
specified value only if the processed packet has a
lower priority
-
“Set” - used to assign a new priority regardless of the
value already assigned to the packet
Log
Enable/disable filter actions logging in the system log
Direction
Set the input/output direction for applying the new rule:
-
“Input” - the rule is used to process inbound traffic
-
“Output” - the rule is used to process outbound traffic
and for post-routing packet filtering
Interface
Set the interface for applying the new rule
All the available interfaces are displayed in the dropdown
list (physical and logical)
If “any” option is used, the rule will be applied to all
available interfaces
Group
Set the Switch Group number for the applying of the new
rule
The Switch Group must be prior created
Rule
Set the packet capture filter for IP firewall
It is the same syntax
called “PCAP expression”, as in the
Switching section
Refer to the filter expression syntax description above
