LT-6652 Rev 0
Page 1 of 4
Installation Instructions for Replacement
MD-1244 Microphone
The kit consists of the following parts:
•
MD-1244: microphone circuit board with adhesive strips on flat side
•
wiring harness
You will also need the following tools:
•
Screwdriver or a utility knife
•
A multimeter probe
To install the microphone, you must perform the following steps:
A. Shut down the unit and disconnect power
B. Remove the old microphone
C. Attach MD-1244 to the door
D. Connect the wiring harness
Details on how to perform these steps are in the following pages.
A.
Shut down the unit and disconnect power
It is essential that you follow the proper shut down procedure.
To shut down the TX3 Touch Screen:
1. At the Touch Screen terminal, enter 9999.
2. Enter your administrator password, and then press
OK
.
3. Select
File > Shut down > Shut down
.
4. After the TX3 Configurator and Windows have finished shutting down, disconnect power
from the Touch Screen.
