Chapter 3 - Configuration scenarios
User Manual
R5000 series - Web GUI
92
Figure 64 - Edit system settings
Step 4
In Basic Settings → Network Settings section, we can change the default IP address
of the svi1 interface.
Let’s add the IP 192.168.1.1/24 for the first unit and the IP
192.168.1.2/24 for the second unit:
Figure 65 - Add IP address on svi1 interface
Step 5
In order to establish a wireless link between the two units, we have to set one of
them as Master. By default, both units are configured as Slave.
In Basic Settings → Link Settings section let’s configure the following radio
parameters for the first unit:
-
Type: Master
-
Polling: On
-
DFS: Off
-
Node ID: 1
-
Channel width: 40 MHz
-
Frequency: 5870 MHz
