Chapter 2 - Features set
User Manual
R5000 series - Web GUI
21
the errors and retries are already taken into account in the throughput results,
at the optimal bitrate)
NOTE
The performance test with
“Use MINT” option is very useful in case you want to get
estimation about the best wireless link throughput (excluding the information about the
bitrate, retries level, etc.).
Priority (0-16) - By default, it is 16, which is lower than the data traffic that has
priority 15. You can increase the test priority by setting a lower value.
The bitrates list on the Performance test tool consists of the bitrates that correspond
to the channel bandwidth set on the unit (5/10/20/40MHz). To perform the tests for
the bitrates related to the other channel bandwidth, you need to reconfigure the
channel bandwidth (the
“Channel Width” parameter in the Radio Setting section of
the Basic Settings page) on both units within the tested link.
Examples given:
1.
Bi-directional performance test output description for 180 Mbps bitrate (40 MHz
channel bandwidth):
Figure 16 - Bi-directional performance test output
2.
Bi-
directional “Use MINT” performance test output:
Figure 17 - Bi-directional
“Use MINT” performance test output
In order to see detailed information about throughput, errors and retries, you can
move the mouse cursor over the indication strip of the required bitrate.
