Chapter 2 - Features set
User Manual
R5000 series - Web GUI
70
By pressing the «Validate» button, you can check the
syntax in the expression in the “Rule” field
Table 15 - IP Firewall
The «Up/Down» arrows allow you to organize rules list. The rules are processed one
by one in a top-down order.
NOTE
Read the information at the end of the Basic Settings page in order to find out the output
of the «Apply», «Test» and «Preview» buttons for the new configuration performed.
2.4.7. SNMP
The SNMP protocol support is an important feature of all communication devices
because it allows the system administrator to manage the operation of a network as
a whole, as well as of each component.
SNMP section contains a set of parameters to exchange data about network activity
of the device.
The SNMP Protocol has two sides, the agent and the management stations:
The agent sends data to the management station
The management station collects data from all the agents on the network. You
can set several destinations of traps with individual set of traps as well as
several users with individual access rights.
The agent sends alerts called traps (see Traps zone) and answers requests that
were sent by the management station
The management station captures and decodes the traps. The management
station also requests specific information from the agent.
The information is passed through requests and replies with the use of the MIB
The management station is responsible for decoding the SNMP packets and
providing an interface to the administrator. The interface can be a GUI or a
command line.
2.4.7.1. Access
In the Access section, you can view and edit the current SNMP access settings; you
can delete the current SNMP v.3 users by pressing the «Remove User» button or
create new ones by pressing the «Add SNMP v.3 User» button:
